And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证精度的情况下计算量较之六次B-B曲面片有较大的减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线轴承运动副,组角精度高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显镜是一种集软件、光、机、电一体的高精度，高效率的显测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小的尺度对检测精度提出较高的要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动既可实现复卷机的节能运行又可提高系统的精度。

The micromanipulator has to control the armature to a precision smaller than a micron.

显操纵器对支架的精度必须小于一。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

方法在收敛速度和精度上都有明显提高。

They immit this spirit at every time they design jewelry styles.

高精度时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，方法实现的星空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆柱和方水准器的沿轴心360度翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的精度要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高精度、数字式多量程欧计的设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片的测量精度优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深度同时进行高精度井水温度观测可以检验模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真度测量的常用方法,但谐波分析的频谱泄露问题会严重影响测量精度。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种的播种精度有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高性能的DSP器来提高加载精度。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工用铣床一条条铣出来的，费工费时，铣槽精度低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔精整加工的方法,它能提高内孔的尺寸、形状精度和改善表面粗糙度。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证精度的情况下计算量较之六次B-B曲面片有较大的减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用精度直线轴承运动副,组角精度。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显镜是一种集软件、光、机、电一体的精度，效率的显测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小的尺度对检测精度出较的要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可实现复卷机的节能运行又可制系统的制精度。

The micromanipulator has to control the armature to a precision smaller than a micron.

显器对支架的制精度必须小于一米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速度和精度上都有明显。

They immit this spirit at every time they design jewelry styles.

精度时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的星空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆柱和方水准器的沿轴心360度翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的精度要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了精度、数字式多量程欧计的设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片的测量精度优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深度同时进行精度井水温度观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真度测量的常用方法,但谐波分析的频谱泄露问题会严重影响测量精度。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种的播种精度有了较大。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计性能的DSP制器来加载精度。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可非球曲面超精密加工机床的轮廓跟踪精度的误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工制用铣床一条条铣出来的，费工费时，铣槽精度低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔精整加工的方法,它能内孔的尺寸、形状精度和改善表面粗糙度。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证情况下计算量较之六次B-B曲面片有较大减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部高直线轴承运动副,组角高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显微镜是一种集软件、光、机、电一体高，高效率显微测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小尺对检测提出较高要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可实现复卷机节能运行又可提高制系统制。

The micromanipulator has to control the armature to a precision smaller than a micron.

显微操纵器对支架制必须小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速和上都有明显提高。

They immit this spirit at every time they design jewelry styles.

高时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现星空视景符合航海模拟器要求和虚拟场景中漫游实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它主要是指圆柱和方水准器沿轴心360翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂设备及塑件要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高、数字式多量程微欧计设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片测量优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深同时进行高井水温观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱析法是目前信号失真测量常方法,但谐波析频谱泄露问题会严重影响测量。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种播种有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高性能DSP制器来提高加载。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超密加工机床轮廓跟踪误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上针槽通常是由人工制铣床一条条铣出来，费工费时，铣槽低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔整加工方法,它能提高内孔尺寸、形状和改善表面粗糙。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证精的情况下计算量较之六次B-B曲面片有较大的减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精直线轴承运动副,组角精高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显微镜是一种集软件、光、机、电一体的高精，高效率的显微测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小的尺对检测精提出较高的要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可实机的节能运行又可提高制系统的制精。

The micromanipulator has to control the armature to a precision smaller than a micron.

显微操纵器对支架的制精小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速和精上都有明显提高。

They immit this spirit at every time they design jewelry styles.

高精时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实的星空视景符合航海模拟器的精要求和虚拟场景中漫游的实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精主要是指圆柱和方水准器的沿轴心360翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的精要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高精、数字式多量程微欧计的设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片的测量精优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深同时进行高精井水温观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真测量的常用方法,但谐波分析的频谱泄露问题会严重影响测量精。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种的播种精有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高性能的DSP制器来提高加载精。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精的误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工制用铣床一条条铣出来的，费工费时，铣槽精低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔精整加工的方法,它能提高内孔的尺寸、形状精和改善表面粗糙。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证的情况下计算量较之六次B-B曲面片有较大的减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高线轴承运动副,组角高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显微镜是一种集软件、光、机、电一体的高，高效率的显微测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小的尺对检测提出较高的。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可实现复卷机的节能运行又可提高制系统的制。

The micromanipulator has to control the armature to a precision smaller than a micron.

显微操纵器对支架的制必须小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速和上都有明显提高。

They immit this spirit at every time they design jewelry styles.

高时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的星空视景符合航海模拟器的和虚拟场景中漫游的实时。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的主是指圆柱和方水准器的沿轴心360翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高、数字式多量程微欧计的设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片的测量优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深同时进行高井水温观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真测量的常用方法,但谐波分析的频谱泄露问题会严重影响测量。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种的播种有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高能的DSP制器来提高加载。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超密加工机床的轮廓跟踪的误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工制用铣床一条条铣出来的，费工费时，铣槽低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔整加工的方法,它能提高内孔的尺寸、形状和改善表面粗糙。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证的情况下计算量之六次B-B曲面片有大的减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用直线轴承运动副,组角。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显微镜是一种集软件、光、机、电一体的，效率的显微测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身小的尺对检测提的要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可实现复卷机的节能运行又可提制系统的制。

The micromanipulator has to control the armature to a precision smaller than a micron.

显微操纵器对支架的制必须小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速上都有明显提。

They immit this spirit at every time they design jewelry styles.

时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的星空视景符合航海模拟器的要求虚拟场景中漫游的实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的主要是指圆柱方水准器的沿轴心360翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了、数字式多量程微欧计的设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片半波片的测量优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深同时进行井水温观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真测量的常用方法,但谐波分析的频谱泄露问题会严重影响测量。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种的播种有了大提。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计性能的DSP制器来提加载。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提非球曲面超密加工机床的轮廓跟踪的误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工制用铣床一条条铣来的，费工费时，铣槽低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔整加工的方法,它能提内孔的尺寸、形状改善表面粗糙。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证精度情况下计算量较之六次B-B曲面片有较大减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线轴承运动副,组角精度高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具微镜是一种集软件、光、机、电一体高精度，高效微测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小尺度对检测精度提出较高要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可实现复卷机节能运行又可提高制系统制精度。

The micromanipulator has to control the armature to a precision smaller than a micron.

微操纵器对支架制精度必须小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速度和精度上都有提高。

They immit this spirit at every time they design jewelry styles.

高精度时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结，该方法实现星空视景符合航海模拟器精度要求和虚拟场景中漫游实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它精度主要是指圆柱和方水准器沿轴心360度翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂设备及塑件精度要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高精度、数字式多量程微欧计设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片测量精度优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如在不同深度同时进行高精度井水温度观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真度测量常用方法,但谐波分析频谱泄露问题会严重影响测量精度。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结，穴播器经改进后对棉种播种精度有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高性能DSP制器来提高加载精度。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床轮廓跟踪精度误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上针槽通常是由人工制用铣床一条条铣出来，费工费时，铣槽精度低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔精整加工方法,它能提高内孔尺寸、形状精度和改善面粗糙度。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证精度情况下计算量较之六次B-B曲面片有较大减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

动部分采用高精度直线动副,组角精度高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显微镜是一种集软件、光、机、电一体高精度，高效率显微测量仪器。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小尺度对检测精度提出较高要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既可现复卷机节能行又可提高制系统制精度。

The micromanipulator has to control the armature to a precision smaller than a micron.

显微操纵器对支架制精度必须小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速度和精度上都有明显提高。

They immit this spirit at every time they design jewelry styles.

高精度时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法现星空视景符合航海模拟器精度要求和虚拟场景中漫时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它精度主要是指圆柱和方水准器沿心360度翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂设备及塑件精度要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高精度、数字式多量程微欧计设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

对于1/4波片和半波片测量精度优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深度同时进行高精度井水温度观测可以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真度测量常用方法,但谐波分析频谱泄露问题会严重影响测量精度。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播器经改进后对棉种播种精度有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高性能DSP制器来提高加载精度。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床轮廓跟踪精度误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上针槽通常是由人工制用铣床一条条铣出来，费工费时，铣槽精度低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔精整加工方法,它能提高内孔尺寸、形状精度和改善表面粗糙度。

And the cost of computing is much less than senary triangular B-B patches.

这种方法在保证精度的情况下计算量较之六次B-B曲面片有较大的减少。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线轴承运动副,组角精度高。

VTM-1510 video toolmaker microscope is a photoelectric measuring system of high precision and efficiency.

工具显微镜是一种集软件、光、机、电一体的高精度，高效率的显微测量仪。

Moreover, thesize of the lithoid relics requires the method by a high precision in inspection.

另一方面文物本身较小的尺度检测精度提出较高的要求。

The multidrive technology can save running energy of the rewinder and improve its control precision.

多传动制技术既实现复卷机的节能运提高制系统的制精度。

The micromanipulator has to control the armature to a precision smaller than a micron.

显微操纵架的制精度必须小于一微米。

Neural network(NN)can be trained as a predistorter which linearlizes nonlinear power amplifier with memory.

该方法在收敛速度和精度上都有明显提高。

They immit this spirit at every time they design jewelry styles.

高精度时钟，停电时钟信息不丢失。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的星空视景符合航海模拟的精度要求和虚拟场景中漫游的实时性要求。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆柱和方水准的沿轴心360度翻身。

Choose the outer surface of the goods as the parting plane to make goods demold successfully.

本模具考虑到年产量、工厂的设备及塑件的精度要求，选择了一模四腔。

This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer.

介绍了高精度、数字式多量程微欧计的设计方法。

It is especially powerful for calibrating quarte-wave-plate and half-wave-plate, the metrical precision is less than 0.1%.

于1/4波片和半波片的测量精度优于0.1%。

High ac-curacy measurements of water temperature at different depths in the future may test our interpretation.

今后如果在不同深度同时进高精度井水温度观测以检验该模型。

The paper has introduced a kind of distortion factor analyser for sinusoidalsignal based on virtual instrument technology.

频谱分析法是目前信号失真度测量的常用方法,但谐波分析的频谱泄露问题会严重影响测量精度。

The bench test results indicated that the metering quality of the dibbler was increased significantly after improvement.

台架试验结果表明，穴播经改进后棉种的播种精度有了较大提高。

The second is: increases the loading precision by designing high performable DSP controller.

特点二是设计高性能的DSP制来提高加载精度。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿制方法。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工制用铣床一条条铣出来的，费工费时，铣槽精度低。

Ballizing is a method of finishing on internal diameter.It can give improvement in dimensional tolerance, roundness and surface finish.

球推压法是一种内孔精整加工的方法,它能提高内孔的尺寸、形状精度和改善表面粗糙度。