The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦损实验,分析了新型高性能粘结剂含量制备压力对摩擦因损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,析了新型高性能粘结含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘结粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

别从外加粘结数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,析了新型高性能粘结剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

外加粘结剂百数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦实,分析了新型高性能粘结剂含量制备压力对摩擦因数率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论实依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩实验,分析了新型高性能粘结剂含量和制备压力对摩因数及率的影响,得到了优化的制备工艺,为新型抗热衰退摩材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对水砖的水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦,分析了新型高性能粘结剂含量制备压力对摩擦因数及的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了高性能粘结剂含量和制备压力对摩擦因数及磨损率影响,得到了优化制备工艺,为热衰退摩擦材研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

和纸张一样具有多孔性，容易使核糊封面所用水溶性粘结剂渗入，因此粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成压力、骨粒径、保温时间、烧成温度等因素对渗水砖渗水速度和强度影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了新型粘剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔，容易使核糊布料封面所用的水溶粘剂渗入，因此布料的粘接好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘剂粘纵折后牙进行微渗漏测试，评价其封闭。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

定速摩擦擦磨损实验,分析新型高性能粘结剂含量和制备压力对摩擦因数及磨损率的影响,得化的制备工艺,为新型抗热衰退摩擦材料的研究提供理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行探讨。