Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但测量过程中由于细小微粉易结“团块”并黏附或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究,粒状变晶结构的翡翠玉件的表面或多或少存一些特殊的微观形貌,它们是一定内部结构、构造不同加工条件下的必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易“团块”并黏附在器壁或搅拌桨上,会影响测量果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内、造在不同加工条件下的必然反映,即表面组。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构翡翠玉件表面或多或少存在些特殊微观,们是定内部结构、构造在不同加工条件下必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀分布在钢带上，随着钢带向前运行，逐步固化成型，最终成大小、高度、外高度均匀致半球固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加工条件下的必然,表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易“团块”并黏附在器壁或搅拌桨上,会影响测量果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内、造在不同加工条件下的必然反映,即表面组。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质一个重要理化指标,但在测量过程细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾合成方法和工艺条件,此工艺已扩大到几百克量级,可满足火工药剂批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构翡翠玉件或多或少存在一些特殊微观形貌,它们是一定内部结构、构造在不同加工条件下必然反映,即组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀分布在钢带上，随着钢带向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法条件,此大到几百克量级,可满足于火药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加条件下的必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易“团块”并黏附在器壁或搅拌桨上,会影响测量果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部、造在不同加工条件下的必然反映,即表面组。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

膏模浇注法生产出了含碳化硅和状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经统研究发现,具状变晶结构的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构在不同加工条件下的必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—统由旋转机头和钢带冷却机组成，机头将物料成颗状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗。