Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤积累最终会导致骨骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴寿命有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样裂纹“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场励电场来测试反铁电材料性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成残余压应力,经工应力衰减后才成影响滚动接触寿命应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据分析，求出了材料黏性系数，给出了利用塑性能耗起点确定材料极限方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求材料的黏性系数，给利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应,经工作应后才成为影响滚动接触疲劳寿命的应状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用是提曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“K法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

文脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤积累最终会导致骨疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验分析，求出了材料黏性系，给出了利用塑性能耗起点确定材料疲劳极限方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤积累最终会导致骨疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮曲轴疲劳寿命有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

出了制厚钢板焊缝断裂韧度试样疲劳裂“K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据分析，求出了材料黏性系数，给出了利用塑性能耗起点确定材料疲劳极限方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤积累最终会导致骨疲骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行疲。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲寿命有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲裂纹“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料疲性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成应力,经工作应力衰减后才成为影响滚动接触疲寿命应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据分析，求出了材料黏性系数，给出了利用塑性能耗起点确定材料疲极限方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。