The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板材的断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对含蜡原油的流变性具有很的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，而有些合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作同类型产品或材料在制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢材或构件进行热处理，在消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经热处理所形成的微孔,对金属原子的吸除作用量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流变性的研究表明，成浆煤的低温热处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板材的断裂模数变小，而含尘。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用含蜡原油的流变性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一合金将使用辅助固溶热处理，而有合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出钢材或构件进行热处理，在消除应力的同时，也可能带来一负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注的氦注入硅中并经热处理所形成的微孔,金属原子的吸除作用已为大的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组、焊接、热处理、水压试验,同时如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

料浆流变性的研究表明，成浆煤的低温热处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进行了探讨,并焊接接头进行了各项性能试验,取得了良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效性，并从实验上该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板材的断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对含蜡原油的流变性具有很的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，而有些合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作同类型产品或材料在制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢材或构件进行热处理，在消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经热处理所形成的微孔,对金属原子的吸除作用量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流变性的研究表明，成浆煤的低温热处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板的断裂模数变小，量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对蜡原油的流变性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，有些合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品料在制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些构件进行热处理，在消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经热处理所形成的微孔,对金属原子的吸除作用已为大量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流变性的研究表明，成浆煤的低温热处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36的焊接工艺特点、预热、焊接、热处理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜料的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过处理后，板材的断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中处理作用对含蜡原油的流变性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出浴索氏体化处理存在的问题,介绍无索氏体化等温处理的原理设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶处理，而有些合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782像仪实际测定激光处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸处理工艺,可作为同类型产品或材料在制过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些材或构件进行处理，在消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经处理所形成的微孔,对金属原子的吸除作用已为大量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、处理、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后处理可以较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流变性的研究表明，成浆煤的低温处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36的焊接工艺特点、预、焊接、处理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在处理持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿处理的比较，分析了等温淬火的有效性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板的断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对含的流变性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存的问题,介绍无铅索氏体化等温热处理的理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，而有些合金将HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢或构件进行热处理，消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经热处理所形成的微孔,对金属子的吸除作用已为大量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对浆流变性的研究表明，成浆煤的低温热处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析了等温淬火的有效性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变热处理工艺运用于截齿生产实际可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对含蜡流变性具有很大影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在问题,介绍无铅索氏体化等温热处理理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与热处理工艺、稀土素之间关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，而有些合金将在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品在制造过程中参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢构件进行热处理，在消除应力同时，也可能带来一些负面作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量氦注入硅中并经热处理所形成微孔,对金属子吸除作用已为大量研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头韧性，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对浆流变性研究表明，成浆煤低温热处理可以改变煤浆流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜形成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢焊接工艺特点、预热、焊接、热处理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理D型派拉纶(PDCPX)有机薄膜电荷陷阱及其储存电荷性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳镍基单晶高温合金在热处理和持久过程中碳化物演化机制以及各种碳化物对合金持久性能影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理比较，分析了等温淬火有效性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证了形变理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过理后，板材的断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中理作用对含蜡原油的流变性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化理存在的问题,介绍无铅索氏体化等理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析了T1相尺寸与理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶理，而有些合金将在HAZ中过度。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

用AGA—782像仪实际测定钢激光理表面度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和理工艺,可作为同类型产品或材料在制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢材或构件进行理，在消除应力的同，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经理所形成的微孔,对金属原子的吸除作用已为大量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场用千斤顶进行组对、焊接、理、水压试验,同对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后理可以较好地改善焊接接头的韧性，但存在耗能大、工长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流变性的研究表明，成浆煤的低理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预、焊接、理等工艺规范进行了探讨,并对焊接接头进行了各项性能试验,取得了良好的果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行了研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高合金在理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等淬火工艺与其它截齿理的比较，分析了等淬火的有性，并从实验上对该工艺进行了验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证形变热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板材的断裂模数变小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程中热处理作用对含蜡原油的流变性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1寸测定结果，分析T1寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合用辅助固溶热处理，而有些合在HAZ中过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢材或构件进行热处理，在消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注入硅中并经热处理所形成的微孔,对属原子的吸除作用已为大量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流变性的研究表明，成浆煤的低温热处理可以改变煤浆的流变性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的形成及热处理后合各成分趋于一致，均合耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进行探讨,并对焊接接头进行各项性能试验,取得良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究一种含微量(0.015%)碳的镍基单晶高温合在热处理和持久过程中的碳化物演化机制以及各种碳化物对合持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析等温淬火的有效性，并从实验上对该工艺进行验证。

The results show that both are caused by decarburization in heat tret-ment.

结果表明,两者均为热处理脱碳所引起。

The feasibility of the ausforming used in producing coal cutter was reasoned.

论证热处理工艺运用于截齿生产实际的可行性。

Heat treated boards display a reduced modulus of rupture and an increase in dustiness.

经过热处理后，板材的断裂模数小，而含尘量增加。

Thermal treatment action in pipage have great effect on the rheology of waxy crude.

管输过程热处理作用对含蜡原油的流性具有很大的影响。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

The response of T1 phase size to heattreatment processing and rare-earth element content are discussed.

根据T1相尺寸测定结果，分析T1相尺寸与热处理工艺、稀土素之间的关系。

Some alloys experience an additional solution heat treatment, while other alloys become overaged in the HAZ.

一些合金将使用辅助固溶热处理，而有些合金将在HAZ过度时效。

The actual surface temperature field during laser heat treatment has been measured by thermovision type AGA 782.

采用AGA—782热像仪实际测定钢激光热处理表面温度场。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程的参考。

Some negative effects may be caused during postwelding heat treatment of certain component and steel for stress-relief.

特别指出对某些钢材或构件进行热处理，在消除应力的同时，也可能带来一些负面的作用。

Furthermore, the authors observe the high gettering efficiency of Au to void in ragged backside of diodes.

高注量的氦注并经热处理所成的微孔,对金属原子的吸除作用已为大量的研究所证实。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆超标的问题进行阐述。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

Pharmaceutical Intermediates species: Sodium Cyanate, Potassium Cyanate, Subsalt of Heat Treatment, the Main Ring of Promethazine Hydrochloride, Promethazine Hydrochloride Side Chain.

氰酸钠、氰酸钾、热处理基盐、盐酸异丙嗪主环、盐酸异丙嗪侧链。

The research of the rheidity of material indicates that low temperature thermal treatment of slurried coal can alter the rheidity of slurry.

对料浆流性的研究表明，成浆煤的低温热处理可以改煤浆的流性。

The passivation patinas and the composition of each phases becoming more homogeneous are moderator to the dealuminization corrosion of high aluminum bronze.

腐蚀钝化膜的成及热处理后合金各相成分趋于一致，均使合金耐腐蚀性能得到改善。

The paper discusses the WB36 steel's wedding craft feature,forewarm,wedding,heat treatment etc,and prosecutes all kinds performance test to wedding joint,then gains favorable results.

文章对WB36钢的焊接工艺特点、预热、焊接、热处理等工艺规范进行探讨,并对焊接接头进行各项性能试验,取得良好的效果。

The charge traps and their properties of storage charge in PDCPX (Polydichloro-P-Xylylene) organic foil material, which has been heat-processed with certain condition are discussed.

本文对经过一定条件热处理的D型派拉纶(PDCPX)有机薄膜材料的电荷陷阱及其储存电荷的性能进行研究。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

Compared with the pick of the isothermric quench technology and the other heating treatment .Analyzing the isothermic quench effect.Checking and verifying the technology through the test .

通过对截齿等温淬火工艺与其它截齿热处理的比较，分析等温淬火的有效性，并从实验上对该工艺进行验证。