When wine is fermented, it gives off gas.

酒酵时出泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出泡稳定性泡倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样的缺陷，:泡、条纹和结石。这些缺陷都是熔制过程中生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的囊表面缺陷；由泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余泡的冷冻创口没有受到感染的影响。

When wine is fermented, it gives off gas.

酒发酵时发出气。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花清晰,无气缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气性以及发倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样的缺陷，比如:气、结石。这些缺陷都是熔制过程中发生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位通常带有残余气的冷冻创口没有受到感染的影响。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产，会产生各种各样的缺陷，比如:气泡、条纹和结石。这些缺陷都是熔制发生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气泡的迁移，建立了膨胀的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后轮胎花纹清晰,无气泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果分析,得出气泡稳定性以及发泡倍率对刀盘扭矩规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生过程，生各种各样缺陷，比如:气泡、条纹和结石。这些缺陷都是熔制过程发生。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂气囊表面缺陷；由气泡生“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气泡迁移，建立了膨胀过程数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周CT扫描显示坏疽部位和通常带有残余气泡冷冻创口没有受到感染。

When wine is fermented, it gives off gas.

酵时出气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试结果的分析,得出气泡稳定性以及泡倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样的缺陷，比如:气泡、条纹和结石。这些缺陷都是熔制过程中生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

When wine is fermented, it gives off gas.

时出气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及泡倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样的缺，比如:气泡、条纹和结石。这些缺都是熔制过程中生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺；由气泡产生的“雨点”状表面缺；“鱼鳞”状表面缺；“山水画”状表面缺。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

验基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

When wine is fermented, it gives off gas.

酒发酵时发出气。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气。

The incorporation of air bubbles in the glass spoiled it.

玻璃有气, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后轮胎花纹清晰,无气料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果分析,得出气稳定性以及发倍率对刀盘扭矩影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样陷，比如:气、条纹结石。这些陷都是熔制过程中发生。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

有非金属夹杂气囊表面陷；由气产生“雨点”状表面陷；“鱼鳞”状表面陷；“山水画”状表面陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气迁移，建立了膨胀过程数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周CT扫描显示坏疽部位通常带有残余气冷冻创口没有受到感染影响。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

化后的轮胎花纹清晰,无气泡和料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样的，比如:气泡、条纹和结石。这些都是熔制过程中发生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面；气泡产生的“雨点”状表面；“鱼鳞”状表面；“山水画”状表面。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

When wine is fermented, it gives off gas.

酒发酵时发出气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻有气泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻生产过程中，会产生各种各样的缺陷，比如:气泡、条纹和结石。这些缺陷都是熔制过程中发生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不有非金属夹杂的气囊面缺陷；由气泡产生的“雨”面缺陷；“鱼鳞”面缺陷；“山水画”面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。

When wine is fermented, it gives off gas.

酒发酵时发气泡。

The water was bubbling gently in the pan.

水锅里轻轻地冒着气泡。

The incorporation of air bubbles in the glass spoiled it.

玻璃含有气泡, 使它质量降低。

After curing, the tire is without bubble and underfeeding and the tread pattern is clear.

固化后的轮胎花纹清晰,无气泡和缺料现象。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分,气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

All kinds of glass defect will occur during the melting production, such as airbladder, stria and concretiono.

玻璃生产过程中，会产生各种各样的缺陷，比如:气泡、条纹和结。缺陷都是熔制过程中发生的。

According to the causes,the surface defects can be divided into blister containing non-metallic inclusion,blister without non-metallic inclusion and “raindrop”,“gills”，“mountained”.

不含有非金属夹杂的气囊表面缺陷；由气泡产生的“雨点”状表面缺陷；“鱼鳞”状表面缺陷；“山水画”状表面缺陷。

Based on those experiments, a mathematic model of process of intumescence was established with the neglect of the transfer motion of the bubble.

实验基础上，忽略气泡的迁移，建立了膨胀过程的数学模型。

CT scan performed at one week after treatment will show an area of necrosis, the cryolesion, which commonly has residual gas bubbles, not to be confused with infection.

术后一周的CT扫描显示坏疽部位和通常带有残余气泡的冷冻创口没有受到感染的影响。