This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

径向跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产径向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三种径向下锯模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受径向负荷，滚子与套圈滚，轴向可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体例，提出了一种求解径向滑动轴承非牛顿三维热流体动力润滑能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔及径向刚技术，验证试验比较好地模拟了介质的一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承径向和轴向的承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层径向排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

径向跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产径向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三种径向下锯模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受径向负荷，滚子与套圈滚道，属轴向可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体例，提出了一种求解径向滑动轴承非牛顿三维热流体动力润滑能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔及径向刚技术，验证试验比较好地模拟了介质的一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承径向和轴向的承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层径向排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

径向跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产径向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三种径向下锯模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受径向负荷，滚子与套圈滚道为线接触，属轴向可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动轴承非牛顿三维热流体动力润滑能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔及径向刚技术，验证试验比较好地模拟了介质的一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承径向和轴向的承载能力都比较，件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层径向排水平均固结度随其埋深而增。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

径向跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产径向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了种径向下锯模：法、法和六法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受径向负荷，滚子与套圈滚道为线接触，属轴向可分离轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动轴承非牛顿流体动力润滑能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔及径向刚技术，验证试验比较好地模拟了介质的一平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承径向和轴向的承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层径向排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

向跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯装该剖料锯即能利用现有锯和跑车生产向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三种向下锯模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受向负荷，滚子与套圈滚道为线接触，属轴向可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解向滑动轴承非牛顿三维热流体动力润滑能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔向刚技术，验证试验比较好地模拟了介质的一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承向和轴向的承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层向排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿向跳动值,以旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

径跳动公差与同轴度公差是形位公差项目中常用位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有机前安装该剖料机即能利用现有机和跑车生产径材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三种径下模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受径负荷，滚子与套圈滚道为线接触，属轴可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径滑动轴承非牛顿三维热流体动力润滑能方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体轴柔及径技术，验证试验比较好地模拟了介质一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承径和轴承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴尺寸目。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层径排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态能试验法测试空载时在精密推台上德国产片齿径跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三下锯模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受负荷，滚子与套圈滚道为线接触，属轴可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一求解动轴承非牛顿三维热流体动能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴柔及刚技术，验证试验比较好地模拟了介质的一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承和轴的承载能都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应随深度增加，土层排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

径向跳动与同轴度形位项目中常用的位置。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产径向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了三种径向下锯模型：四开法、三开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承般只用于承受径向负荷，滚子与套圈滚道为线接触，属轴向可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了种求解径向滑动轴承非牛顿三热流体动力润滑能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔及径向刚技术，验证试验比较好地模拟了介质的面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承径向和轴向的承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层径向排水均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍种用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.

向跳动公差与同轴度公差是形位公差项目中常用的位置公差。

A special horizontal circle saw and corresponding sawing procedure were designed to get trisected and edge-grain lumber.The new tec...

在现有的带锯机前安装该剖料锯机即能利用现有锯机和跑车生产向材。

Three radial sawing patterns, sectorial radial sawing models of quarter timbers, trisected timbers and hexsected timbers are presented in this paper.

介绍了向下锯模型：四开法、开法和六开法。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子轴承一般只用于承受向负荷，滚子与套圈滚道为线接触，属轴向可分离型轴承。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一求解向动轴承非牛顿维热流体动力能的方法。

The soft-stiff rings of the experimental box are used to ensure axial softness and radial stiffness; the veridical experiments simulate better the one-dimensional plane strain motion.

由于采用了软硬环试验箱体以保证箱体的轴向柔及向刚技术，验证试验比较好地模拟了介质的一维平面应变运动。

With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

轴承向和轴向的承载能力都比较大，各配件可替换强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。

It is concluded that the average degree of radial consolidation for a given soil layer increases with its buried depth since the geostatic pressure increases with the lattar.

结果表明，因自重应力随深度增加，土层向排水平均固结度随其埋深而增大。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一用动态能试验法测试空载时在精密推台锯上的德国产锯片锯齿向跳动值,以及旋转主轴振动情况。