Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半晶热塑性塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基在硬化的塑性功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹塑性力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不塑性的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对铸态铅黄铜进行了准超塑性研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑性及流性并使胶料粘性增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑性力学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可塑性物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼粘度、塑性和热老化性能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑性变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期性的变化可能是枢神经系统的神经可塑性变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小395％时，其塑性变形具有明显的单系滑移特征，当变形量大395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热塑性材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑性极限—完全分开.原子间合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、性类色、著色力强, 容易分散在所有热塑性塑胶、塑化剂、水体系即溶体系。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹塑性变形和宏观弹塑性响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑性弹性体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬中的塑功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹塑结构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚来分隔卷筒不推力或帮忙不塑的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘单向拉伸对铸态铅黄铜进行了准超塑研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑及流动并使胶料粘增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑力学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可塑物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼粘度、塑和热能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期的变可能是由于中枢神经系统的神经可塑变引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小于395％时，其塑变形具有明显的单系滑移特征，当变形量大于395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基反应,使木粉转成为热塑材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑极限—完全分开.原子间结合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中类色、著色力强, 容易分散在所有热塑塑胶、塑剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹塑变形和宏观弹塑响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑弹体及其硬段模型合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利微波加热使陶瓷材料在较高温度下塑,从而获得到较好的加工。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏系数，给出了利塑能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一通过浓缩成型而制备的，一半结晶热塑性塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬化中的塑性功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选导了弹塑性结构动时程分析的递公。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

滚用来分隔卷筒或帮忙塑性的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对铸态铅黄铜进行了准超塑性研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑性及流动性并使胶料粘性增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑性学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可塑性物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼粘度、塑性和热老化性能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑性变形自组织能。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

长期性的变化可能是由于中枢神经系统的神经可塑性变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小于395％时，其塑性变形具有明显的单系滑移特征，当变形量大于395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热塑性材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑性极限—完全分开.原子间结合遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中性类色、著色强, 容易分散在所有热塑性塑胶、塑化剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹塑性变形和宏观弹塑性响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑性弹性体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一通过浓缩成型而制备的，一晶热料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬化中的功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对铸态铅黄铜进行了准超研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的及流动并使胶料粘增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和力学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究解剂B对NR门尼粘度、和热老化能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这长期的化可能是由于中枢神经系统的神经可化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在形量小于395％时，其形具有明显的单系滑移特征，当形量大于395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热材料,再与短切剑麻纤维混合,热压制得植物纤维增强化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在形超过其极限—完全分开.原子间合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中类色、著色力强, 容易分散在所有热胶、化剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹形和宏观弹响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热弹体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下化,从而获得到较好的加工。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏系数，给出了利用能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT一种通过浓缩成型而制备的，一种半结热塑性塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点在硬化中的塑性功可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹塑性结构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不塑性的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对态铅黄铜进行了准超塑性研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑性及流动性并使胶料粘性增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑性力学理论，并以此为础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡可塑性物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼粘度、塑性和热老化性能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜体具有良好的塑性变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期性的变化可能由中枢神经系统的神经可塑性变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单铝线材在变形量小395％时，其塑性变形具有明显的单系滑移特征，当变形量大395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙化反应,使木粉转化成为热塑性材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑化植物纤维复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑性极限—完全分开.原子间结合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中性类色、著色力强, 容易分散在所有热塑性塑胶、塑化剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属复合材料的细现弹塑性变形和宏观弹塑性响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑性弹性体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象:第二相颗粒的回溶,合金体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的点是基于在硬化中的塑功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹塑结构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不塑的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对铸态铅黄铜进行了准超塑研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑及流动使胶料加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑力学，以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可塑物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼度、塑和热老化能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期的变化可能是由于中枢神经系统的神经可塑变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小于395％时，其塑变形具有明显的单系滑移特征，当变形量大于395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热塑材料,再与短切剑麻纤维混合,热压制得植物纤维强塑化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑极限—完全分开.原子间结合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中类色、著色力强, 容易分散在所有热塑塑胶、塑化剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维强金属基复合材料的细现弹塑变形和宏观弹塑响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑弹体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑化,从而获得到较好的加工。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏系数，给出了利用塑能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑性塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬化中的塑性功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推塑性结构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不塑性的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对铸态铅黄铜进行准超塑性研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑性及流动性并使胶料粘性增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑性力学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可塑性物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼粘度、塑性和热老化性能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑性变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期性的变化可能是由于中枢神的神可塑性变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小于395％时，其塑性变形具有明显的单滑移特征，当变形量大于395％时，才出现多滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热塑性材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑性极限—完全分开.原子间结合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中性类色、著色力强, 容易分散在所有热塑性塑胶、塑化剂、水体即溶体中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现塑性变形和宏观塑性响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成一列聚氨酯脲热塑性性体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述在室温强塑性变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出材料的黏性数，给出利用塑性能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑性塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬化中的塑性功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹塑性结构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不塑性的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸对铸态铅黄铜进行了准超塑性研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有的塑性及流动性并使胶料粘性增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学塑性力学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

蜡是可塑性物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂B对NR门尼粘度、塑性热老化性能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑性变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期性的变化可能是由于中枢神经系统的神经可塑性变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小于395％时，其塑性变形具有明显的单系滑移特征，当变形量大于395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热塑性材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑性极限—完全分开.原子间结合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度、中性类色、著色力强, 容易分散在所有热塑性塑胶、塑化剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹塑性变形宏观弹塑性响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑性弹性体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在温度下塑性化,从而获得到好的加工性。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Polybutylene terephthalate (PBT) is a semicrystalline thermoplastic polymer formed by a condensation process.

PBT是一种通过浓缩成型而制备的，一种半结晶热塑性塑料。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬化中的塑性功是可控制的因子。

This paper firstly deduces the recurrence formula of plastoelastic structure dynamic analysis.

本文首选推导了弹塑性结构动力时程分析的递推公式。

La hobber uponsize used to isolate a drum or help elastic crisp reel mansuetude material.

不推滚用来分隔卷筒不推力或帮忙不塑性的、脆刚的量料堵住卷筒。

The quasi-superplasticity of as-cast lead brass was studied by monodirectional elongation experiment.

摘要采用单向拉伸铸铜进行了准超塑性研究。

The gross rubber has a high plasticity and fluidity and gumminess of composition is increased.

其具有较高的塑性及流动性并使胶料粘性增加。

It is related to metallurgy,thermology,and the theory of plasticity and developed on the basis of them.

它涉及金属学、热学和塑性力学理论，并以此为基础，交叉发展而成。

Clay and wax are plastic substances.

黏土和蜡是可塑性物质。

The influence of peptizer B on Mooney viscosity,plasticity and heat aging property of NR was investigated.

研究塑解剂BNR粘度、塑性和热老化性能的影响。

For single crystal sliding occurs in two directions, and for bicrystal copper the mechanism of plastic defor...

模拟还发现纳米铜晶体具有良好的塑性变形自组织能力。

Plastic changes in nociceptive transmission may occur at the spinal cord as well as supraspinal structures after tail amputation.

这种长期性的变化可能是由于中枢神经系统的神经可塑性变化引起的（从脊髓背角到皮层）。

The results indicate that when the plastic strain is smaller than 39 5%,plastic deformation has typicality of uniserial slipping.

单晶连铸铝线材在变形量小于395％时，其塑性变形具有明显的单系滑移特征，当变形量大于395％时，才出现多系滑移特征。

By means of cyanoethylation and chlorination,wood sawdust was converted into thermoplastic material and then compounded with short sisal fibers.

通过氰乙基化反应,使木粉转化成为热塑性材料,再与短切剑麻纤维混合,热压制得植物纤维增强塑化植物纤维基复合材料。

When metallic material deformation forereach its plastic limit , it will divide completely. Then the interatomic force is damaged.

断裂-金属材料在变形超过其塑性极限—完全分开.原子间结合力遭受破坏.

Hombitan LOCR-K is characterized by its high degree of whiteness, It gives neutral colour shade and has strong coloring power.

白度高、中性类色、著色力强, 容易分散在所有热塑性塑胶、塑化剂、水体系即溶体系中。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹塑性变形和宏观弹塑性响应。

And two new segmented poly(urethaneureas) were prepared from poly(tetramethylene glycol)(PTMG) or polyadipate of 1,4 butanediol(PBA), MDI and Urea(as chain extender).

以尿素为扩链剂，合成了一系列聚氨酯脲热塑性弹性体及其硬段模型化合物。

In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。