The relative displacement between the front and retral loading location is emphasized.
着重研究了前后载点的相对位移。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材载在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结零状态几何,而可以一次得到对应于初状态(即预应力态)几何的结
放样尺寸(即零状态几何),并通过分级
载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸点的相
位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向的情况下,应用三维有限元
析软件
天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行
析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过
级
该方法的
度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类器装
,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸点的相
位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向的情况下,应用三维有限元
析软件
天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行
析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过
级
该方法的
度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类器装
,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸点的相
位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计性能的DSP控制器来提
精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向的情况下,应用三维有限元分析软件分
然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过分级
该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类器装
,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零几何,而可以一次得到对应于
(即预应力
)几何的结构施工放样尺寸(即零
几何),并通过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件类插件
类将不会自动加载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结态几何,而可以一次得到对应于初
态(即预应力态)几何的结
施工放样尺寸(即
态几何),并通过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,件
理类
件
理类将不会自动加载你的
件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无结构零状态几何,而可以一次得到对应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加点的相
位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加在他们的两个铁,他的家人将独轮车火炉燃烧
量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加的情况下,应用三维有限元分析软件分别
天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
方法无需假定结构零状态几何,而可以一次得到
应于初状态(即预应力态)几何的结构施工放样尺寸(即零状态几何),并通过分级加
方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果类被引导类加
器装
,从CLASSPATH 中查找
类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性关系。
Otherwise, the plugin manager class will not be able to autoload your plugin!
,
件管理类
件管理类将不会自动加载你的
件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状,而可以一次得到对应于初状
(即预应力
)
的结构施工放样尺寸(即零状
),并通过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载力值成线性。
Otherwise, the plugin manager class will not be able to autoload your plugin!
则,插件管理类插件管理类将不会自动加载你的插件!
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧量他们在卡普林的房子。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应力进行分析。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几,
以一次得到对应于初状态(即预应力态)几
的结构施工放样尺寸(即零状态几
),并通过分级加载对该方法的精度进行了检验。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。