Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设的“三”即规范、参数优和算机辅助设。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

要提出了一种多工位薄板装配过程测点优设方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优结构、寻找新的鬼臼毒素类合物资源替代品,已成为当前进一步研究的主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分是打入桩优设方法的关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇基潜在的仿生应用，其天然优的形状和切割角的自动调节可指导地面机械的仿生设。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的优设方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进行了优。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其冻干燥和蜜饯加工条件的优。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的优设提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交设和优。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优、赝势的选取和交换关联项的选择都对算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优了企业的内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优鱼藤酮异构制备异鱼藤酮的工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO算和群论，优得到了较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊工艺进行了参数优设。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优红景天的提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优动物细胞染色体的临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优泵的工作参数是提高泵阀的密封性能、延长其使用寿命的重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计的“三化”即规范化、参数优化和计算机辅助设计化。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出一种多工位薄板装配过程测点优化设计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新的鬼臼毒素类化合物资源替代品,已成为当前进一步研究的主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性是打入桩优化设计方法的关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨复合式有源消声耳罩的控制器的优化设计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进行优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的优化。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今完善温室的优化设计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行正交设计和优化。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优化、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优化企业的内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为优化鱼藤酮异构化制备异鱼藤酮的工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优化得到较满意的中位取代四苯基卟啉(H2TPP)的子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最用正交试验的方法对肖特基器件部封装中的压焊工艺进行参数优化设计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天的提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体的临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优化泵的工作参数是提高泵阀的密封性能、延长其使用寿命的重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计“三化”即规范化、参数优化和计算机辅助设计化。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点优化设计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新鬼臼毒素类化合物资源替代品,已成为当前进一步研究主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、桩可打性分是打入桩优化设计方法环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇仿生应用，其天然优化形状和切割角自动调节可指导地面机械仿生设计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩控制器优化设计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨苯甲醛显色法测定桃叶珊瑚甙显色条件进行了优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇不同预处理方法及其真空冷冻干燥和蜜饯加工条件优化。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室优化设计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交设计和优化。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数优化、赝势选取和交换联项选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才参与，优化了企业内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优化鱼藤酮异构化制备异鱼藤酮工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优化得到了较满意中位取代四苯卟啉(H2TPP)分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验方法对肖特器件后部封装中压焊工艺进行了参数优化设计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优化泵工作参数是提高泵阀密封性能、延长其使用寿命重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破计的“三”即规范、参数和计算机辅助计。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

结构、寻找新的鬼臼毒素类合物资源替代品,已成为当前进一步研究的主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分是打入桩计方法的关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇基潜在的仿生，天然的形状和切割角的自动调节可指导地面机械的仿生计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采均匀计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进行了。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及真空冷冻干燥和蜜饯加工条件的。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交计和。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

秀人才的参与，了企业的内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了鱼藤酮异构制备异鱼藤酮的工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运MNDO计算和群论，得到了较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后正交试验的方法对肖特基器件后部封装中的压焊工艺进行了参数计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

红景天的提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和动物细胞染色体的临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，泵的工作参数是提高泵阀的密封性能、延长使寿命的重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计的“三化”即规范化、参数优化和计算机辅助设计化。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出一种多工位薄板装配过程测点优化设计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新的鬼臼毒素类化合物资源替代品,已成为当前进一步研究的主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性是打入桩优化设计方法的关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨复合式有源消声耳罩的控制器的优化设计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进行优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的优化。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今完善温室的优化设计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行正交设计和优化。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优化、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优化企业的内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为优化鱼藤酮异构化制备异鱼藤酮的工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优化得到较满意的中位取代四苯基卟啉(H2TPP)的子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

用正交试验的方法对肖特基器件部封装中的压焊工艺进行参数优化设计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天的提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体的临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优化泵的工作参数是提高泵阀的密封性能、延长其使用寿命的重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破计的“三”即规范、参数和计算机辅助计。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点计法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

结构、寻找新的鬼臼毒素类合物资源替代品,已成为当前进一步研究的主要。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]志鹏.发酵法生产米多霉素的菌种选育、培养条件和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分是打入桩计法的关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇基潜在的仿生应用，其天然的形状和切割角的自动调节可指导地面机械的仿生计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的计法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进行了。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理法及其真空冷冻干燥和蜜饯加工条件的。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交计和。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

秀人才的参与，了企业的内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了鱼藤酮异构制备异鱼藤酮的工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，得到了较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的法对肖特基器件后部封装中的压焊工艺进行了参数计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

红景天的提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和动物细胞染色体的临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，泵的工作参数是提高泵阀的密封性能、延长其使用寿命的重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿破设计“三化”即规范化、参数优化和计算机辅助设计化。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点优化设计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新鬼臼毒素类化合物资源替代品,已成为当前进一步研究主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分是打入桩优化设计方法关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇基潜在仿生应用，其天然优化形状和切割角自动调节可指导地面机械仿生设计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩控制器优化设计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙显色条件进行了优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇不同预处理方法及其真空冷冻干燥和蜜饯加工条件优化。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善优化设计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交设计和优化。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数优化、赝势选取和交换关联项选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才参与，优化了企业内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优化鱼藤酮异构化制备异鱼藤酮工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优化得到了较满意中位取代四苯基卟啉(H2TPP)分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验方法对肖特基器件后部封装中压焊工艺进行了参数优化设计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优化泵工作参数是提高泵阀密封性能、延长其使用寿命重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计的“三化”即规范化、参数优化和计算机辅助设计化。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点优化设计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新的鬼臼毒素类化合物资源替,成为当前进一步研究的主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分是打入桩优化设计方法的关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇基潜在的仿生应用，其天然优化的形状和切割角的自动调节可指导地面机械的仿生设计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的优化设计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对基苯醛显色法测定桃叶珊瑚甙的显色条件进行了优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的优化。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的优化设计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交设计和优化。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优化、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优化了企业的内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优化鱼藤酮异构化制备异鱼藤酮的工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优化得到了较满意的中位取四苯基卟啉(H2TPP)的分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊工艺进行了参数优化设计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天的提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体的临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优化泵的工作参数是提高泵阀的密封性能、延长其使用寿命的重要途径。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计“三”即规范、参数优计算辅助设计。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点优设计方法。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优结构、寻找新鬼臼毒素类合物资源替代品,已成为当前进一步研究主要方向。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素菌种选育、培养条件优力学研究.浙江:浙江大学,2005 Xie Z P.

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分是打入桩优设计方法关键环节。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分了臭蜣螂唇基潜在仿生应用，其天然优形状切割角自调节可指导地面仿生设计。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩控制器优设计方法。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙显色条件进行了优。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇不同预处理方法及其真空冷冻干燥蜜饯加工条件优。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室优设计提供理论依据。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行了正交设计优。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数优、赝势选取交换关联项选择都对计算结果有较大影响。

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才参与，优了企业内部管理，也使企业更具有市场竞争力。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优鱼藤酮异构制备异鱼藤酮工艺。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算群论，优得到了较满意中位取代四苯基卟啉(H2TPP)分子构型。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验方法对肖特基器件后部封装中压焊工艺进行了参数优设计。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优红景天提取工艺。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优九节茶薄层鉴别色谱条件，以提高鉴别灵敏度。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进优物细胞染色体临时制片技术。

The optimum operating parameters is the important way to improve seal performence of pump valve and to prolon...

因此，优泵工作参数是提高泵阀密封性能、延长其使用寿命重要途径。