A piston links to a drive shaft by means of a connecting rod.

活塞通过连杆与驱动轴相连。

Once the ventilator shaft became blocked, the warehouse quickly filled with fumes.

通风管一旦堵塞, 仓库很快就充满了烟雾。

The auxiliary shaft topsoil adopted ordinary construction and drainages in hygrometric well.

屯留煤矿副井井筒表土段采用普通法施工,利用井井疏干。

The fifth is assigned to crack shaft (with the doline in the same seam).

五是地缝配竖井（天坑与地缝相通）。

It's more automatable and easier to repair shafts using laser overlaying welding technology.

数控编程等手段运用大大提高了工作效率 ,也低了现场操作难度。

An arrow consists of a shaft with head (point), nock, fletching and, if desired, cresting.

一支箭包括有箭头箭杆、箭尾、羽片，亦可加上箭饰。

Claudia felt a shaft of pain shoot through her chest.

克劳迪娅感到一阵疼痛直穿胸部。

Unclamp the shaft from the vise and slide off the top bearing.

松老虎钳上轴，将顶部轴承移出。

This is the shaft of a steam engine.

这是一个蒸汽机主轴。

He was wounded by a shaft.

他被箭击中受伤。

With the balance shaft, improved vibratility.

带平衡轴，发动机运行平稳，震动小。

However,the point of setscrew may cause damage to the shaft and may be difficult to remove.

这种方式固定及拆卸方便，而且不会造成轴新损坏。是一种很常用固定方式。

Through to introduce equipments of vertical shaft the cautery ,compendiary introduce insufficiency of electricity-arc spray-paint to prevent cauterization.

通过对竖井井筒装备情况和电弧喷涂长效防技术不足了解,建议采用玻璃钢复合材料井筒装备来解决井筒装备问题。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,轴承孔位置误差测量和控制是十分重要。

Axially mounted circlips for shafts.

Sprin retaining rings.

Unbolt the shaft coupling bolts.

拧联轴器螺栓。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂原因。

The technical measures and structure,applied principles of blastproof of ventilation shaft at excavating face,specific operational method and prospective effect are described.

介绍了掘进工作面防炮崩风筒主要技术措施及技术结构、应用原理、采用这项技术具体操作方法及达到预期效果。

Based on the method to design the 3-D knottiness gimbale transmission shaft,the torsion vibration is reducde,and the syntony is also avoided.

按此法设计计算三维空间多节万向传动轴可减轻系统扭振及避免共振。

In addition,the nonintervention condition of screw arris of the stirring shafts is obtained and the screw parameter of stirring shaft is optimized.

②搅拌轴螺棱间不发生干涉,优化了搅拌轴螺杆参数。